An ageing tarmac drive
Cracking, patched repairs and weeds along the edges. If the tarmac is still stable it can often be resurfaced; if it is breaking up, it comes out.
Severn Stone & Resin
Resin Driveways in Worcester
We install resin-bound driveways for homes across Worcester and the villages around it — from older properties near the city to newer estates on the edge of town. Careful preparation, honest advice and a clear price before any work starts.
Clear Quotes
Measured, itemised, no pressure
Proper Ground Preparation
The base decides how long it lasts
Worcester & Nearby Areas
City, suburbs and villages
Resin-Bound Specialists
Driveways, paths and parking areas
What is a resin-bound driveway?
Natural aggregate is mixed with a clear resin and trowelled out over a prepared base to form one continuous surface. Every stone is coated, so nothing works loose underfoot or gets carried into the house.
Small gaps remain between the stones, which is what allows water to pass through rather than run off to the road. That matters on a lot of Worcester frontages, where drives sit close to the pavement and surface water has nowhere obvious to go.
The finish is smooth but not slippery, easy to sweep, and free of the joints and weeds you get with block paving. More about resin bound surfacing.
Why Worcester homeowners choose resin
Drives that were never designed for today’s cars
Plenty of drives around St John’s, Barbourne and Battenhall were laid decades ago for lighter, smaller vehicles. Resurfacing is a chance to sort the base and levels at the same time.
Surface water with nowhere to go
Older frontages often drain towards the house or straight onto the pavement. A permeable build-up, a channel drain or a border soakaway usually solves it.
Finishes that suit the house
Red brick, painted render and black-and-white detailing all sit differently against stone. Choosing an aggregate that matches the brickwork makes more difference than most people expect.
Low upkeep through a wet winter
A joint-free surface means no weeds coming through and no sand washing out. A brush over now and then keeps it looking right.
Common driveway problems we see around Worcester
Suitability always comes back to the existing surface and the site itself, so we look before we advise.
Loose gravel that spreads everywhere
Stone in the lawn, on the path and in the hallway. The same aggregate look, bound so it stays where it was laid.
Water sitting on the drive
Standing water after heavy rain usually points to levels or a sealed surface. Drainage gets designed in rather than added afterwards.
Tidying the front of an older property
Sunken paving and mismatched repairs pull a frontage down. A single clean surface with a defined edge lifts the whole house.
How a driveway is put together
- 01
Site visit
We measure up, check the existing surface and talk through what you want.
- 02
Preparation
Excavation where needed, then a compacted sub-base and edging set to the right levels.
- 03
Drainage
Falls, channels or a permeable build-up, decided by how water moves on your frontage.
- 04
Laying
The aggregate and resin are mixed on site and trowelled out to an even depth.
- 05
Curing & checks
The surface is left to cure, edges are finished and the site is cleared.
What affects the cost
No two drives price the same, and a figure given over the phone without seeing the surface is a guess.
Size of the drive
Area is the starting point, but shape and awkward corners add labour.
The existing base
Sound concrete may be resurfaced. A failed base has to come out.
Excavation & disposal
Digging out and carting away spoil is a real cost on a full rebuild.
Drainage
Channel drains, soakaways or a permeable build-up where water needs managing.
Edging
Existing kerbs may be reused; new edging is priced by the metre.
Access
Narrow entries and terraced frontages mean barrowing rather than machinery.
Aggregate choice
Different stone blends carry different material costs.
Repairs & groundwork
Sunken sections, old foundations and tree roots take extra work.
Colours and finishes
Natural stone blends, from pale buffs through to dark flint. We can leave samples with you so you can see them against the house in daylight.
Buff & gold blend
Silver grey
Mixed autumn
Dark flint
Oyster
Steel & silver
Colours shown are illustrative. Natural aggregate varies slightly from batch to batch.
Compare colours and finishesResin, block paving or tarmac?
Resin isn’t the right answer for every house. This is roughly how the three compare in practice.
| Resin bound | Block paving | Tarmac | |
|---|---|---|---|
| Appearance | Smooth, joint-free stone finish | Patterned, traditional look | Plain, uniform black |
| Drainage | Water passes through the surface | Depends on jointing and falls | Sheds water to a fall |
| Weeds | None through the surface | Can appear in joints | Edges and cracks over time |
| Repairs | Patch repairs can show | Blocks lift and relay neatly | Patches are visible |
| Upkeep | Sweeping and the odd wash | Weeding, re-sanding | Occasional crack repair |
Where we work
We work across Worcester and the villages either side of the Severn. If you are a little further out, ring and ask — we will tell you honestly whether it is a sensible job for us to take on.
Areas we cover- Worcester
- St John's
- Barbourne
- Warndon
- Claines
- Battenhall
- Northwick
- Red Hill
- Hallow
- Kempsey
- Powick
- Fernhill Heath
Resin driveway questions we’re asked in Worcester
Thinking about a resin driveway?
Send us a few details and we’ll arrange a look at the existing surface, measure up and give you a clear price.